Please note that due to the recent fire at Huyton Industrial estate in Merseyside affecting APC parcel couriers, deliveries of PAVETUF products are currently being disrupted to "L" and "WA" postcode zones. We have not yet been given an indication as to when normal service will resume to these areas.

EASYSeal Slate & Limestone - 5 Litre

EASYSeal Slate & Limestone is formulated specifically for low-porosity natural stone such as limestone and slate to both enhance and protect the surface. For more porous natural stones, EASYSeal Sandstone Sealer & Enhancer is better suited.
Read more
£44.14 £36.78
In Stock - Usually 1-2 working days. Same-day despatch on orders placed before 10:30am. Delivery charges apply at checkout.

Fast Dispatch & Delivery

Find out more here.

Helpful Advice

Make sure you check out our advice section or call our friendly team.

Ethically sourced

We go out of our way to make sure our products are ethically sourced.

Key Features

EASYSeal Slate & Limestone is a high grade water based enhancer, designed specifically for limestone and slate to exaggerate the natural stone's colour whilst giving a transparent sheen finish.
EASYSeal Slate & Limestone's solvent-free solution provides a good level of protection, providing oil and water repellence to offer resistance to staining and fungal growth.
Quick Drying
EASYSeal Sandstone dries in as little as four hours. Full curing takes up to 24 hours - longer in cold conditions. Optimum performance is achieved after 2-3 days.
Based on a single coat, applied at 4-5M2 per litre, a 5 Litre tub of EASYSeal Slate & Limestone covers approximately 20 to 25M2. Coverage can vary dependant on the porosity and texture of the surface and the application method used. As the density and porosity of natural stone can vary even within the same batch, the sealant may absorb at different rates which reflects in the finish - a second coat is recommended to help achieve a more even finish.
When is best to apply EASYSeal Slate & Limestone?
Ideal application conditions would be between 10ºC and 30ºC. Avoid applying during rain or when rain is forecast within 4 hours of application. Do not apply if frosty or when surface and air temperature are below 5ºC.
How To Apply EASYSeal Sandstone
EASYSeal Slate & Limestone is best applied using a long piled roller. Shake well prior to use. Ensure surfaces are clean and free of any marks, stains, efflorescence and contamination as these will otherwise be permanently sealed in after application. Ensure the surface is completely dry before application and rain is not imminent. Do not pour the product directly on to the surface. Use a long pile roller and try to apply a generous, even coat at a rate of 4-5m2 per litre - removing any excess or runs of product t avoid patchy finishes. Apply an additional coat whilst the sandstone remains damp from the previous coat. (Maximum three coats.)
Once the final coat has been applied, do not walk or drive on the area for four hours. Keep pets away until completely dry. Full curing takes 24 hours - longer in colder conditions.
Not suitable for surfaces which have been previously treated with silicon or stearate based water repellent sealants. Do not use in wet weather or when rain if forecast within 4 hours of application. Always test first on a small, inconspicuous area or spare piece first to ensure suitability and finish.

Technical Specifications

Brand: Azpects