EASYSeal Contract - 20 Litre

Azpects
EASYSeal Contract is a professional grade sealer suitable for block paving, concrete paving, raw concrete and pattern imprinted concrete. Deep penetrating, EASYSeal Contract provides excellent repellence to oil and water to resist staining whilst also offering colour enhancement to the paving.
Read more
£76.80 £64.00
In Stock - Usually 1-2 working days. Same-day despatch on orders placed before 12pm. Delivery charges apply at checkout.

Fast Dispatch & Delivery

Find out more here.

Helpful Advice

Make sure you check out our advice section or call our friendly team.

Ethically sourced

We go out of our way to make sure our products are ethically sourced.

Key Features

Protects All Concrete Types
EASYSeal Contract is a professional grade solvent-free sealer suitable for all types of concrete including block paving, decorative concrete paving flags, raw concrete such as slabs and garage floors and pattern imprinted concrete.
Repels & Resists
By penetrating deep into the concrete, EASYSeal Contract provides excellent oil and water repellence - protecting the it against different types of staining.
Hard Wearing Colour Enhancement
EASYSeal Contract leaves a hard-wearing light sheen once dried - enhancing the colour in paving. Additional coats increases the protection and adds a greater sheen to the surface.
Coverage
5 litres covers up to 50M2. 20 litres covers up to 200M2. Coverage can vary dependant on the porosity and texture of the surface and the application method used.
When is best to apply EASYSeal Ultimate?
Ideal application conditions would be between 10ºC and 30ºC. Avoid applying during rain, frost or when surface or air temperatures will be below 5ºC.
How To Apply EASYSeal Contract
EASYSeal Contract is best applied using a long piled roller. Shake well prior to use. Ensure surfaces are clean and free of any marks, stains, efflorescence and contamination as these will otherwise be permanently sealed in after application. Ensure the surface is completely dry before application and rain is not imminent. Do not pour the product directly on to the surface. Use a long pile roller and try to apply an even coat - removing any excess or runs of product. For dense concrete such as block paving, apply a single coat for a slight enhancement, apply a second coat (within an hour of the first) for a light sheen and a third coat (within an hour of the second) for a greater sheen finish. More porous concretes will require a minimum of two coats, applying the second within an hour of the first. A third coat can be applied to achieve a greater sheen, again, to be applied within an hour of the second.
Aftercare
Keep pets away until the surface is fully dry. Allow to cure overnight before subjecting the surface to heavy use, allowing for longer in cold, damp conditions. Optimum performance is reached after two to three days.
Precautions
Always test first on a small, inconspicuous area or spare piece first to ensure suitability and finish. EASYSeal Contract is not suitable for surfaces which have previously been protected with a sealer. Old protective coating should be removed using EASYCare Sealer Remover prior to applying EASYSeal Contract. Not suitable for non-porous surfaces such as quarry tiles, engineering bricks and glazed surfaces.

Technical Specifications

Brand: Azpects
WhatsApp Chat
WhatsApp Chat