EASYCare Efflorescence Remover Plus - 1 Litre Concentrate

Azpects
EASYCare Efflorescence Remover Plus is a non-acidic salt neutralising solution to remove and reduce re-appearance of the naturally occurring phenomenon of efflorescence.
Read more
£21.90 £18.25
In Stock - Usually 1-2 working days. Same-day despatch on orders placed before 12pm. Delivery charges apply at checkout.

Fast Dispatch & Delivery

Find out more here.

Helpful Advice

Make sure you check out our advice section or call our friendly team.

Ethically sourced

We go out of our way to make sure our products are ethically sourced.

Key Features

What is Efflorescence?
Efflorescence is a phenomenon which causes white marks to appear on surfaces such as paving and brickwork. Naturally occurring, it is as release of salts which deposit themselves on the surface, spoiling the look of the patio, driveway or brickwork. These can result from a multitude of causes, all of which are difficult to determine, for example (but not limited to), drawn up from the ground itself or the cement in mortar or concrete products. The salt deposits left can usually be brushed or washed away, although they will still reappear. For white stains that don't dissolve or brush off, this may be calcium-based, for which Mortar Stain & Calcium Remover would be better suited for removal.
It Works, Then Keeps Working
Efflorescence Remover not only treats efflorescence on the surface initially, but by penetrating the substrate, it helps to make reoccurring salts soluble for easier removal afterwards.
Coverage
The 1 Litre super-concentrated solution can be diluted to cover up to 60M2 Coverage can vary dependant on the porosity and texture of the surface, the dilution, the amount of contamination and the application method used.
How To Apply
1 Litre Concentrate: 1. Remove loose dirt and debris from the area prior to applying. 2. Shake well before use. 3. Dilute with water - For light contamination; 100ml to 1 Litre of water For heavy contamination; 200ml to 1 Litre of water. 4. Allow to act for at least 60 minutes. 5. Reapply and leave for 24 hours to allow deep penetration and neutralisation of the salts. After 24 hours, use a power washer or hose and stiff brush to wash the surface.
Precautions
Always test first on a small, inconspicuous area or spare piece first to ensure suitability and finish. Ideal application conditions would be between 10ºC and 20ºC. Avoid applying during rain, frost or when surface or air temperatures will be below 5ºC. Do not apply in direct sunlight. Avoid contact with plants, shrubs and grass. Keep children and pets away until the cleaning processed is finished and the surface has dried.

Technical Specifications

Brand: Azpects
WhatsApp Chat
WhatsApp Chat