Please note that due to the recent fire at Huyton Industrial estate in Merseyside affecting APC parcel couriers, deliveries of PAVETUF products are currently being disrupted to "L" and "WA" postcode zones. We have not yet been given an indication as to when normal service will resume to these areas.

EASYCare Black Spot Remover - 3 Litre

EASYCare Black Spot Remover effectively tackles Lichen - the small black and white spots which are notoriously difficult to remove from paving. Power washing alone is often not enough to remove Lichen, but becomes much easier and more effective after applying Black Spot Remover first.
Read more
£28.18 £23.48
In Stock - Usually 1-2 working days. Same-day despatch on orders placed before 10:30am. Delivery charges apply at checkout.

Fast Dispatch & Delivery

Find out more here.

Helpful Advice

Make sure you check out our advice section or call our friendly team.

Ethically sourced

We go out of our way to make sure our products are ethically sourced.

Key Features

What is Black Spot / Lichen?
Lichen is a symbiont - a combination of algae, bacteria and fungus living and benefitting off each other harmoniously. The fungus anchors itself to the surface, with the algae and bacteria living off and feeding the fungus. The way the fungus element roots itself in to the substrate, such as paving, makes it almost impossible to shift even with scrubbing.
How does Black Spot Remover work?
In short, Black Spot Remover kills the organisms helping them to 'lose grip' of the surface which become much easier to remove with a power washer than without treatment.
3 litres covers up to 15M2. 5 litres covers up to 25M2. Coverage can vary dependant on the porosity and texture of the surface, level of contamination and the application method used.
How To Apply
1. Remove loose dirt and debris from the area prior to applying. 2. Lightly dampen the surface (not wet) 3. Shake well before use. 4. Apply the product using a roller or brush - saturating the surface generously and evenly. For light contamination; apply at a rate of 5M2 per litre For heavy contamination; apply at a rate of 3M2 per litre 5. Leave for 2 to 8 hours depending on level of contamination. Extreme contamination may be left for 24 hours. 6.Test a small section to determine if efficacy achieved. 7. Once satisfied, use a pressure washer to rinse and clean the area
Always test first on a small, inconspicuous area or spare piece first to ensure suitability and finish. Ideal application conditions would be between 10ºC and 30ºC. Avoid applying during rain, frost or when surface or air temperatures will be below 5ºC. Cooler temperatures may reduce effectiveness. Keep children and pets away until cleaning is complete and the surface has fully dried.

Technical Specifications

Brand: Azpects